Waterproof coating: Apply a coat of Dr. Fixit Roofseal Classic (diluted with water in the ratio 2:1) as Self Priming 9.0 – 14.7 Sq.mt / litre. Allow coating to dry for 3-4 hours. Apply two coats of Dr. Fixit Roofseal Classic @ 5.8 – 7.9 Sq.mt / litre / coat, without water dilution, the rate of application being the same for both the coats. This would ensure correct consumption of material that will deliver a total . Coating should be terminated below the drip mould on the vertical surface. Check to see no void surface is left untreated / uncoated. Allow the system to air cure for 7 days. The material having following technical Specification as per ASTM D 6083 M – Type II, Attains a Tensile Strength of 2.5 N/mm2 confirming to ASTM D 2370; Elongation at break ≥ 300% confirming ASTM D 2370, Adhesion to Concrete 2.0 N/mm2 confirming ASTM D 4541 and Crack bridging ability up to 2 mm, Air cure the coating for 7 days, before water pound test for 48 hrs. The system comes with 7 years waterproofing performance . For vertical surfaces: Apply a 2 coat of Dr. Fixit Roofseal Classic with forced coverage of 7.9 -8.9 Sq.mt / litre / Coat. It’s Depend upon surface absorption Entire terrace should be coated with Roofseal Classic along with parapet walls needs to be enveloped with Roofseal Classic / Raincoat system
